oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-if70.0m-14e 70.0 mhz if saw filter 14.80 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-if70.0m-14e january 2011 rev a 70.0 mhz if saw filter 14.80 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1 = 220 nh output l1 = 220 nh, c1=7.5pf source/load impedance 50 ?
oscilent part number 813-if70.0m-14e january 2011 rev a 70.0 mhz if saw filter 14.80 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 70.0 - insertion loss at fo db - 20.0 22.0 group delay variation (fo7.15mhz) nsec - 45 70 absolute delay at fo usec - 1.65 - passband ripple variation (f o7.15mhz) db - 0.7 1.0 bandwidth at -1db mhz 14.65 14.80 - bandwidth at -3db mhz 15.20 - bandwidth at -40db mhz - 17.10 17.30 ultimate rejection db 45 47 - relative attenuation fo8.3mhz db 17 21 - temperature coefficient ppm/c - -72 -
oscilent part number 813-if70.0m-14e january 2011 rev a 70.0 mhz if saw filter 14.80 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db relative attenuation
oscilent part number 813-if70.0m-14e january 2011 rev a 70.0 mhz if saw filter 14.80 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo7.15mhz group delay variation fo7.15mhz smith chart
oscilent part number 813-if70.0m-14e january 2011 rev a 70.0 mhz if saw filter 14.80 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|